Home > Blossary: Types of Steels
Steel is an alloy of iron, with carbon being the primary alloying element, up to 2.1% by weight. Carbon, other elements, and inclusions within iron act as hardening agents that prevent the movement of dislocations that naturally exist in the iron atom crystal lattices.

Category: Engineering

21 Terms

Created by: Naveed

Number of Blossarys: 5

My Terms
Collected Terms
English (EN)
Compare Language

けい素鋼板用いたには近似 0.05% カーボンと 0.10 % マンガンと 0.50 を 1% シリコンと未満の 0.02 パーセントの燐と硫黄が含まれます。けい素鋼板を用いたより良い弾性、電気およびマンガン プロパティに通常があります。さらに、これらの鋼 ay 高温のスケーリング抵抗性の増強を表わします。 ...

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Manganese in the range of 1.65 to 2 percent is added to improve tensile strength,hardness,harden ability and hot workability of steel.Manganese steel with high carbon 1.1 to 1.4 percent and high ...

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Silicon steels contains approximate 0.05 percent carbon and 0.10 percent manganese and 0.50 to 1 percent silicon and less than 0.02 percent sulphur and phosphorus.Silicon steels usually have better ...

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Steels shaped by casting method are known as cast steels.Mechanical properties of cast product are inferior as compared to wrought product of same steel.Two important factors,i.e.production of ...

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Wrought steels are shaped by plastic deformation(mechanical working).View examples of the ornamental wrought iron railings, fences, gates, spiral staircases .This name of steel is given on the base ...

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Austenitic stainless steels offer excellent weldability, but austenite isn't stable at room temperature. Consequently, specific alloys must be added to stabilize austenite. The most important ...

Domain: Materials science; Category: Metallurgy

Ferritic stainless steels have 12 to 27 percent chromium with small amounts of austenite-forming alloys.

Domain: Materials science; Engineering; Education; Category: Metallurgy; Mechanical engineering; Knowledge

Member comments


( You can type up to 200 characters )

Post  
My other Blossarys

Heat Treatment is the controlled heating and ...

Category: Engineering

By: Naveed

Defects determine many properties of materials ...

Category: Engineering

By: Naveed

Machining is any of various processes in which a ...

Category: Engineering

By: Naveed

New materials have been among the greatest ...

Category: Engineering

By: Naveed