- Industry: Machine tools
- Number of terms: 4249
- Number of blossaries: 0
- Company Profile:
The Timken Company's expertise is in metallurgy, friction management and power transmission. In using this expertise their goal is to improve the reliability and efficiency of machinery all around the world.
A bearing with filling notches to allow the loading of the maximum number of balls.
Industry:Machine tools
Cylindrical roller with large length to diameter ratio. The length is between three and ten times the diameter, which does not usually exceed 5 mm. The ends of the needle roller may be one of several shapes.
Industry:Machine tools
An irregular roller path from deflection, inaccurate machining or wear of bearing seats.
Industry:Machine tools
The outer, thin-wall, rigid structure of the lip-seal assembly that contains the primary sealing ring and, if present, the inner case, spring and secondary seal.
Industry:Machine tools
The control of friction and wear by introducing a friction-reducing film between moving surfaces that make contact. It may be a fluid, solid or plastic substance.
Industry:Machine tools
Any substance used to separate two surfaces in motion and reduce the friction or wear of the surfaces.
Industry:Machine tools
A fit or fit up of inner ring, balls, and outer ring which results in the existence of appreciable radial clearance.
Industry:Machine tools
Ring fitting over extended inner ring of insert bearing and having setscrews which pass through holes in inner ring to make contact with shaft.
Industry:Machine tools
Ring having recess on one side which is eccentric in relation to bore and fits over equally eccentric extension of inner ring insert bearing. Collar is turned in relation to inner ring until it locks and then secured to shaft by tightening of setscrews.
Industry:Machine tools
