upload
U.S. Energy Information Administration
Industry: Energy
Number of terms: 18450
Number of blossaries: 0
Company Profile:
A set of categories used to account for how crude oil and petroleum products are transferred, distributed, or removed from the supply stream. The categories include stock change, crude oil losses, refinery inputs, exports, and products supplied for domestic consumption.
Industry:Energy
A grade of coal that has been processed to reduce the amount of impurities present and improve the burning characteristics.
Industry:Energy
A general classification for one of the petroleum fractions produced in conventional distillation operations. It includes diesel fuels and fuel oils. Products known as No. 1, No. 2, and No. 4 diesel fuel are used in on-highway diesel engines, such as those in trucks and automobiles, as well as off-highway engines, such as those in railroad locomotives and agricultural machinery. Products known as No. 1, No. 2, and No. 4 fuel oils are used primarily for space heating and electric power generation.
Industry:Energy
The primary distillation unit that processes crude oil (including mixtures of other hydrocarbons) at approximately atmospheric conditions. It includes apipe still for vaporizing the crude oil and a fractionation tower for separating the vaporized hydrocarbon components in the crude oil into fractions with different boiling ranges. This is done by continuously vaporizing and condensing the components to separate higher oiling point material. The selected boiling ranges are set by the processing scheme,the properties of the crude oil, and the product specifications.
Industry:Energy
A grade of coal that are waste materials from preparation plants. In the anthracite region, culm consists of coarse rock fragments containing as much as 30 percent small-sized coal. Silt is a mixture of very fine coal particles (approximately 40 percent) and rock dust that has settled out from waste water from the plants. The terms culm and silt are sometimes used interchangeably and are sometimes called refuse. Culm and silt have a heat value ranging from 8 to 17 million Btu per ton.
Industry:Energy
A generator that is located close to the particular load that it is intended to serve. General, but non-exclusive, characteristics of these generators include: an operating strategy that supports the served load; and interconnection to a distribution or sub-transmission system (138 kV or less).
Industry:Energy
Generally contains 1 percent or less sulfur by weight. For air quality standards, "low sulfur coal" contains 0.6 pounds or less sulfur per million Btu, which is equivalent to 1.2 pounds of sulfur dioxide per million Btu.
Industry:Energy
A system for heating hot water, for other than space heating purposes, which is located at more than one space within a building. A point-of-use water heater is located at the faucet and heats water only as required for immediate use. Because water is not heated until it isrequired, this equipment is more energy-efficient.
Industry:Energy
A grade of coal that meets the requirements for making coke. It must have a low ash and sulfur content and form a coke that is capable of supporting the charge of iron ore and limestone in a blast furnace. A blend of two or more bituminous coals is usually required to make coke.
Industry:Energy
The delivery of energy to retail customers.
Industry:Energy