upload
The Petroleum Extension Service
Industry: Education; Oil & gas
Number of terms: 4495
Number of blossaries: 0
Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
a drilling method in which a hole is drilled by a rotating bit to which a downward force is applied. The bit is fastened to and rotated by the drill stem, which also provides a passageway through which the drilling fluid is circulated. Additional joints of drill pipe are added as drilling progresses.
Industry:Oil & gas
a method of severing pipe in a well by applying high pressure jets of a very corrosive substance against the wall of the pipe. The resulting cut is very smooth.
Industry:Oil & gas
to create holes through the casing with a shaped charge of high explosives instead of a gun that fires projectiles. The loaded charges are lowered into the hole to the desired depth. Once detonated, the charges emit short, penetrating jets of high-velocity gases that make holes in the casing and cement for some distance into the formation. Formation fluids then flow into the wellbore through these perforations. See bullet perforator, gun-perforate.
Industry:Oil & gas
a worker on a drilling or workover rig, subordinate to the driller, whose primary work station is on the rig floor. Sometimes called floorhand, floorman, rig crew member, or roughneck.
Industry:Oil & gas
a fishing tool that uses high-pressure jets of chemicals to sever casing, tubing, or drill pipe stuck in the hole.
Industry:Oil & gas
a machine part in which a rotating shaft (a journal) revolves or slides. Also called a plain bearing.
Industry:Oil & gas
the hose on a rotary drilling rig that conducts the drilling fluid from the mud pump and standpipe to the swivel and kelly; also called the mud hose or the kelly hose. It is a steel-reinforced, flexible hose that is installed between the standpipe and the swivel or top drive.
Industry:Oil & gas
a method of improved oil recovery in which chemicals dissolved in water are pumped into a reservoir through injection wells to mobilize oil left behind after primary or secondary recovery and to move it toward production wells.
Industry:Oil & gas
a length of drill pipe or casing. Both come in various lengths.
Industry:Oil & gas
a length of pipe whose bottom edge is serrated or dressed with a hard cutting material and that is run into the wellbore around the outside of stuck casing, pipe, or tubing to mill away the obstruction.
Industry:Oil & gas