- Industry: Automation
- Number of terms: 8432
- Number of blossaries: 0
- Company Profile:
Rockwell Automation, Inc. provides industrial automation power, control, and information solutions.
The name of the programming language used for programming color graphics displays.
Industry:Automation
The name of the report-generation programming language used for programming the 1775-GA Peripheral Communication Module.
Industry:Automation
The percentage of ac left on a dc signal after rectifying. Measured peak-to-peak of the ac component.
Industry:Automation
The resistive ladder network used in a CMOS D/A converter that divides the input current into currents that represent binary-weighted counts.
Industry:Automation
The time required for the processor to scan all I/O modules, writing output data and reading input data. For local I/O, the I/O scan is typically in sequence with the program scan, in one overall scanning sequence. For remote I/O, the I/O scan is separate from the program scan; it is either left asynchronous to the program scan or is synchronized to the program scan by buffering input data from the I/O scan to write it into the input image table only immediately before the start of each program scan.
Industry:Automation
This type of motor mounting is used to close-couple pumps and similar applications where the mounting holes in the face are threaded to receive bolts from the pump. Normally C-face is used where a pump or similar item is to be overhung on the motor. This type of mounting is a NEMA standard design and available with or without feet.
Industry:Automation
To convert software into a different form for use in an environment different from that for which it was originally generated.
Industry:Automation
A location in a program at which execution is halted during debugging so that a programmer can examine information such as the program’s status and the contents of variables.
Industry:Automation
