Aluminum

Aluminum

Industry: Metals

Add a new term

Contributors in Aluminum

Become a Contributors

Aluminum

maximum speed

Metals; Aluminum

The fastest practical extrusion rate or velocity which is related to the extrusion press ram's velocity. The formula is: Max. Ram speed (ipm) x reduction ratio x 12 = maximum speed (ft/min).

stretcher jaw mark

Metals; Aluminum

A cross hatched appearance left by jaws at the end(s) of metal that has been stretched. These marks are seen if insufficient metal has been removed after the stretching operation.

stop mark

Metals; Aluminum

A bank-like pattern around the full perimeter of an extruded section and perpendicular to its length. A stop mark occurs whenever the extrusion process is suspended.

(1) For rolled products, an area of broken surface that is introduced after processing. The mark usually has no relationship to the rolling direction. (2) For extrusions, damage that can be imparted ...

rub mark

Metals; Aluminum

A large number of very fine scratches or abrasions. A rub mark can occur by metal-to-metal contact, movement in handling and movement in transit.

chatter mark

Metals; Aluminum

Numerous intermittent lines or grooves that are usually full width and perpendicular to the extrusion direction.

mandrel

Metals; Aluminum

The fixed or floating projection positioned in the die opening that forces metal to flow around it. The wall thickness of the extrusion is determined by the difference in the dimensions of the die ...