10 Terms
Home > Industry/Domain > Manufacturing > Industrial manufacturing
Industrial manufacturing
General manufacturing that involves industrial production to transform raw materials into finished goods and products.
Industry: Manufacturing
Add a new termContributors in Industrial manufacturing
Industrial manufacturing
acrylonitrile styrene acrylate (ASA)
Manufacturing; Industrial manufacturing
ASA is produced either by a patented, proprietary process or by graft process. ASA has superior weatherability compared with ABS and because of an absence of double bonds resists yellowing and ...
injection temperature
Manufacturing; Industrial manufacturing
Sometimes referred to as the processing temperature or melt temperature, this property describes the temperature at which molten material is injected into the mold. The injection temperature is ...
spindle speed
Manufacturing; Industrial manufacturing
The rotational speed of the spindle in revolutions per minute (RPM). In a milling machine, the spindle speed describes the rotation of the attached cutting tool. In a turning machine, it describes ...
feature spacing
Manufacturing; Industrial manufacturing
The distance between two identical features, measured from the end of one feature to the start of the next. If multiple identical features exist at varied spacing, then the average distance between ...
beams
Manufacturing; Industrial manufacturing
Long, rigid structures that are attached at one or both ends to a surface to provide support. These include arms, axles, bars, columns, cylinders, pillars, poles, posts, rails, rods, shafts, spokes, ...
labor usage
Manufacturing; Industrial manufacturing
The percentage of time for a task, such as the setup time or production time, where workers are paid at the specified labor rate. A manual labor task will have a usage of 100%, while a partially ...
feed system
Manufacturing; Industrial manufacturing
Sometimes called the runner system or gating system, the feed system describes all of the channels in a mold that allow the molten material to feed into the cavities. This system may include the ...
